Basic Info.
Conditions
of Use
Marine, Land Use
Output Type
AC Three Phase
Cooling
Method
Air Cooled
Installation
Method
Fixed
Generator
Type
Diesel Generator
Function
Diesel Generator Remote Start Control Panel
Type
Diesel Engine Generator
Quality Class
a Class High Quality
Trademark
SAFE. Speed Ctroller
Transport Package
Single Box
Specification
18*17.5*5cm
Product Description
Main Description
DSE 501K DEEP SEA GENERATOR CONTROLLER DSE501KThe Model DSE Genset controller DSE501Kis a Manual Engine Control Module, which has been designed to manually control the engine via a key switch on t front panel. The DSE Genset controller DSE501K is used to start and stop the engine, indicating fault conditions; automatically shutting down the engine and indicating the engine failure by LED giving true first up fault annunciation.
Dimension: 1100mm*72mm
Shipping Weight: 0.5KG
Application: Gas & Diesel Generator
Operation of the module DEEP SEA CONTROLLER 501K is via a three position key switch mounted on the front panel with STOP(O), RUN(I) and START(II) positions. In the 'O' position the DC provide is removed from the module and the run relay and alarm output are de-energised. If the switch is turned to the 'I' position the module is powered up and the run relay is energised, activating the engine fuel/ignition system and the protection hold-off timer is initiated. If the switch is moved to the 'II' position and held against the spring return, a positive provide is applied to the relevant output terminal and on to the starter motor. Once the engine has started the switch should be released and allowed to return to the 'I' position.
DSE DSE501K Deep Sea Generator Controller Operation of any of the following alarms; Low Oil Pressure, High Engine Temperature, Auxiliary Shutdown, Overspeed (Optional), will cause the run relay to de-energise. This will remove the fuel/ignition provide from the engine and bring it to rest. The alarm output will be activated giving a positive DC output.
Each alarm channel has it's own LED indicator and once activated no further alarm conditions will be accepted. The alarm output and relevant LED will remain active until the unit is reset by turning the switch to the 'O' position.
Overspeed Protection (Optional) is achieved by the fitment of an additional PCB in the module. This provides integral overspeed protection derived from either the generator HZ output or the engine magnetic pick-up (specified on ordering). The overspeed circuit continuously monitors the engine speed and will shut down the engine immediately if a pre-set speed level is exceeded. This trip level is adjustable from 90% to 130% of full rated speed and is suitable of both 50Hz or 60Hz systems.
During engine cranking and for a short time afterwards the protection hold-off timer is active and the relevant alarms inputs are inhibited. This enables the engine to start and achieve normal running conditions. Once the timer has expired the inputs are enabled providing normal protection from the module.
Charge Failure warning is also provided by monitoring the WL terminal on the charge alternator. This operates on a similar principal to the warning lamp fitted in a motor vehicle, should the output fail the charge fail LED will illuminate. The module will also provide the alternator excitation current via this connection.
Control Function | Protection Function | Data Display |
Auto-test Commercial Power | Low-Lubrition Oil | Battery Voltage |
Emergency Stop | Charging Failure | Oil Pressure |
Manual Start/Stop | Over Voltage,Over Load | Operation Time |
Long-Distance Start/Stop | High Water Temperature | Frequency |
Auto quit of Start motor | Over Frequency | Voltage |
Auto quit of Start motor | Low Frequency | Amper |
| Stop Failure | Water Temperature |
| Start Failure | Speed |
Stamford SX460 SX440 AS440 SX480 AS480 MX321 MX341 MX450
Leroy Somer R220 R230 R250 R438 R450 R448 R449
MARATHON SE350
MECCALTE SR7 UVR6
MARELLI M16FA655A M40FA640A
BASLER VR6 AEC42-7 AVC63-2-5 AVC63-4A AVC63-7 AVC110-6
Normal 6A 8A 10A 12A 15A 20A EA05A EA04C EA16A WT-2 WT-3 701 703 704
Speed Controller Sensor Indicator Rectifier and so onOur Factory Payment & Shipment contact us FAQ Q: Is our company a trade company or factory?
A: We are manufacturer, we have own factory for AVR, Rectifier diodes. And have OEM factory for other parts like control moduel ,
speed control and canopy parts etc. Which is certified by Alibaba and our showed photos can prove it.
Q: Are the products original ?
A: Most the goods are replaced type made in china, but can 100% replaced the original one with reliable performance. Also we
supply the Original parts for the parts too.Welcome to inquiry
Q: What' s the warranty?
A: Standard warranty 12months for all the goods. Vip enjoy 24months warranty
Q: Whats the leading time for the goods?
A: 80% of goods in stock supply will be sent out immediately against payment. Whole process time for your information
1. 2-3days to express warehouse from our city;
2. 6-12 days from china to your address
Q: Can you provide the free sample?
A: Usually we didnt provide the free sample.But can apply some free sample according to your company qualification.But freight cost should be paid by customer.
Address:
Qinxiyang Industry Zone, Fuan City, Fujian Province
Business Type:
Trading Company
Business Range:
Industrial Equipment & Components, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.