Basic Info.
Conditions
of Use
Marine, Land Use
Usage
Standby Unit, Distant Control, Multi-Protection, LED Data Displa
Output Type
AC Three Phase
Cooling
Method
Air Cooled
Installation
Method
Fixed
Generator
Type
Diesel Generator
Function
Governor Speed Control
Similar Model
ESD5500e ESD5120 5570 etc
Quality Class
a Class High Quality
Stock
Stock Supply for ESD5111
Operation Humidity
Max 95%
Transport Package
Single Box
Specification
18*17*5.5cm
Product Description
Main Description Mechanical Diesel Engine Speed Control Unit ESD5220E Governor
The Diesel Engine Speed Control Unit Governor
ESD5220E Series speed control unit is an all electronic device designed to control engine speed with fast and precise response to transient load changes. This closed loop control, when connected to a proportional electric actuator and supplied with a magnetic speed sensor signal, will control a wide variety of engines in an isochronous or droop mode. It's designed for high reliability and built ruggedly to withstand the engine environment. Simplicity of installation and adjustment was foremost in the design. Non Interacting performance controls allow near optimum response to be easily obtained.
Other features include, adjustable droop and idle operation, inputs for accessories used in multi-engine or special applications, a single element speed switch, protection against reverse battery voltage, transient voltages, accidental short circuit of the actuator and fail-safe design in the event of loss of speed sensor signal or battery supply.
Package Included
1 x Speed Controller
ESD5220 Electronic Engine Speed Controller Governor Generator Genset Parts |
Input | Supply | 12 or 24 VDC Battery System (Transient and Reverse Voltage) |
Polarity | Negative Ground (Case Isolated) |
Power Consumption | 50 ma continuous plus actuator current |
Actuator Current Range @77°F (25 °C) - (Inductive Load) | Min.2.5 Amps; Max. 10Amps continuous |
Speed Sensor Signal | 0.5-120 Volts RMS |
Speed switch Relay Contacts(N.O.and N.C) | 10 Amps |
Performance | Isochronous Operation/Steady State Stability | ±0.25% or better |
Speed Range/Governor | 1K to 7.5K Hz continuous |
Speed Drift with Temperature | ±1% Max |
Idle Adjust CW | 60% of set speed |
Idle Adjust CCW | Less than 1200 Hz. |
Droop Range | 1-5% regulation |
Droop Adj. Max.(K-L Jumpered) | 400 Hz., ±75Hz. Per 1.0A change |
Droop Adj. Min. (K-L Jumpered) | 15Hz., ±6Hz. Per 1.0A change |
Speed Trim Range | ±200 Hz |
Remote Variable Speed Range | 500 - 7.5 Hz. Or any part there of Terminal Sensitivity |
Terminal Sensitivity J | 100 Hz., ± 15Hz / Volt @ 5.0 K Impedance |
Terminal Sensitivity L | 735 Hz., ±60 Hz / Volt @ 65 K Impedance |
Terminal Sensitivity N | 148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance |
Terminal Sensitivity P | 10 VDC Supply @ 20 ma Max |
Speed witch adjustment range | 1000-10000HZ |
Environmental | Ambient Operating Temperature Range | -40 to +180°F(-40°+85 °C) |
Relative Humidity | Up to 95% |
All Surface Finishes | Fungus Proof and Corrosion Resitant |
Reliability | Vibration | 1G @ 20 to 100 Hz. |
Testing | 100% Functionally Tested |
Physical | Dimensions | See outline (FIGURE 1) |
Weigh1 | 1.8 lbs.(820 grams) |
Mounting | Any position, Vertical Preferred |
Detail Show
We also supply the following generator receplacement alternator AVR and spare parts.
Stamford SX460 SX440 AS440 SX480 AS480 MX321 MX341 MX450
Leroy Somer R220 R230 R250 R438 R450 R448 R449
MARATHON SE350
MECCALTE SR7 UVR6
MARELLI M16FA655A M40FA640A
BASLER VR6 AEC42-7 AVC63-2-5 AVC63-4A AVC63-7 AVC110-6
Normal 6A 8A 10A 12A 15A 20A EA05A EA04C EA16A WT-2 WT-3 701 703 704
Speed Controller Sensor Indicator Rectifier and so onOur Factory Payment & Shipment contact us FAQ Q: Is our company a trade company or factory?
A: We are manufacturer, we have own factory for AVR, Rectifier diodes. And have OEM factory for other parts like control moduel ,
speed control and canopy parts etc. Which is certified by Alibaba and our showed photos can prove it.
Q: Are the products original ?
A: Most the goods are replaced type made in china, but can 100% replaced the original one with reliable performance. Also we
supply the Original parts for the parts too.Welcome to inquiry
Q: What' s the warranty?
A: Standard warranty 12months for all the goods. Vip enjoy 24months warranty
Q: Whats the leading time for the goods?
A: 80% of goods in stock supply will be sent out immediately against payment. Whole process time for your information
1. 2-3days to express warehouse from our city;
2. 6-12 days from china to your address
Q: Can you provide the free sample?
A: Usually we didnt provide the free sample.But can apply some free sample according to your company qualification.But freight cost should be paid by customer.
Address:
Qinxiyang Industry Zone, Fuan City, Fujian Province
Business Type:
Trading Company
Business Range:
Industrial Equipment & Components, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.